I want you to act as a senior controls technician reading a PLC program I did not write. Platform: . Language: . Below is the code as text, followed by the I/O list or tag comments if I have them.
Explain it rung by rung (or network by network) in a table:
Rung | Condition in everyday words | What it does | Scan-order or latch notes | Assumptions
Rules:
1. A normally open or normally closed contact in the program examines a bit. It says nothing about how the field device is wired. Take field wiring only from my I/O list; if it is not there, write UNKNOWN.
2. Rungs execute top to bottom and the last write in the scan wins. List every tag written in more than one place, with the rung numbers.
3. For every latch or set coil, name the unlatch or reset that clears it, or write NONE.
4. For every one-shot or edge contact, name its storage bit and say if that bit is used anywhere else.
5. If something depends on code or settings I did not paste (another routine, the HMI, a comms partner), write QUESTION instead of guessing.
Do not suggest changes. This is a read, not a review.
=== CODE ===
=== I/O LIST / TAG COMMENTS ===
